2024+ Altitude
The Altitude needs a BSA 73 Threaded bottom bracket, meaning that it's 73mm wide and uses English type threads.
Fri, 26 Apr, 2024 at 12:32 PM
The fork offset on the 2024 Altitude is: 37mm offset
Fri, 26 Apr, 2024 at 12:36 PM
Altitude Carbon: No.85-1 0mm Offset Headset, complete These headsets use: Top FSA Stainless ACB 1 1/8" 36°x45° Bearing Bottom Stainless ACB 1.5&q...
Fri, 26 Apr, 2024 at 12:39 PM
Reach-Adjust Headset All frames are equipped with reach adjust headsets to fine tune the reach. Installed on the frame is a 0mm / neutral headset. In the sm...
Fri, 26 Apr, 2024 at 12:44 PM
Chainring Size Range: Minimum = 30 | Maximum 34T
Fri, 26 Apr, 2024 at 12:54 PM
These measurements are using the OEM Installed Chainring. SM = 32T | 116L MD = 32T | 118L118L LG - XL = 32T | 120L The chainline range for the Altitude ...
Fri, 26 Apr, 2024 at 1:03 PM
The Altitude is compatible with forks up to 170mm in travel with the following MAX Axle to Crown Length. Please make sure the manufacturers measurements adh...
Fri, 26 Apr, 2024 at 1:06 PM
Dropper post length is dependent on a few factors; the first being your saddle height and the second being the maximum seatpost insertion depth which you’ll...
Fri, 26 Apr, 2024 at 1:10 PM
The Altitude uses a 12mm x 148mm rear hub. The total axle length is 173mm, with a 1.0 thread pitch. Replacement rear axles can be purchased from our on...
Fri, 26 Apr, 2024 at 1:14 PM
Both the Alloy and Carbon versions of the Altitude require a 30.9mm diameter seat post.
Fri, 26 Apr, 2024 at 1:17 PM