Support

The dropper post length is dependent on a couple of factors; the first being your saddle height and the second being the maximum seatpost insertion depth w...

We recommend running 30-35% sag for the rear shock and 15-20% for the fork on the Slayer.

The slayer uses a 30.9mm seatpost.

The Slayer uses a 34.9mm seat post collar.

The Slayer has the 2 lower ISCG05 tabs and is compatible with 2-bolt bash guards. 

The Slayer uses a 230 mm x 65 mm length shock. The forward shock hardware is a 25mm x 8mm ID pin and reducers, and the rear shock mount uses our bearing ey...

The maximum chainring size that’s compatible is a 36t. The maximum oval chainring size that’s compatible is a 34t. One thing to consider is that the Canad...

The Slayer uses a Zero Stack headset: ZS44|ZS56. It comes spec'd with FSA No.57 ZS44 | ZS56. If you wish to change the headset brand, you will need to ...

The Slayer uses a 12mm x 173mm with a 1mm thread pitch, replacement rear axles can be purchased from our online store. It is also available through your loc...

The Slayer has 200mm 2-postion brake mounts. It will fit up to a 223mm rotor with a 23mm adapter.